Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

October 22 2015


Fall Protection and Security

Fall Protection
Actually, falls are considered the biggest security risk for construction workers on most sites, especially the ones that require work on extremely raised heights, like bridge building. Falls from high locations would be the number one cause of death in construction workers on construction sites.

Rooftop Safety
Building safety related to fall protection comprises an assessment of the correct methods of access to the heights where the work must be done, safety precautions being set in place and followed at all times, and consistently clearing the construction work area of all debris.

Clearing debris and gear is obviously an essential part of fall prevention and fall protection. Lots of fall injuries occur because of excessive debris and an excessive amount of equipment that's lying around. By placing things where they go and keeping the main construction work area free of additional "stuff," you can reduce a fantastic deal of accidents that occur from falling and tripping. As an additional incentive, the after-work cleanup will be a lot simpler and faster if you "clean and clear" as you go.

Moreover, it is important that construction workers not become too overly confident or even cocky while at work, believing building safety is "below" them or they don't desire the hassle of protective equipment and supplies when venturing out onto high places "for just a minute." Nonetheless, a lot can occur in a minute, and this is actually when many autumn accidents do occur, and with no fall protection, particularly safety harnesses, injuries can not be much better and even deadly. While at work, adequate and suitable protective equipment must be worn at all times. By taking time to use up before going out on the edge to get a minute or two, your own life could be saved.

To be able to ensure your fall protection equipment, such as safety harnesses, keeps its quality is secure and safe, and is working to its maximum potential, it's very important to follow along with a couple of storage as well as maintenance guidelines:

Put such building safety gear where it belongs to stop damage (for example, hang up harnesses; don't throw them on the floor). Store them away from heat and compounds. Assess them every day for dirt /debris accumulation and damage. Remove grime build-up with light soap plus a bit warm water; hang dry. Remove damaged equipment in the premises--damaged goods should not be utilized as a "second best" option. Equipment that has been exposed to some fall must also be taken off the site and future service right away.

Anchorage points on the construction site ought to be frequently scrutinized as well for routine acceptance, weakening, excessive damage, sharp edges, and cracks or tears. Roof stacks, ladders, guardrails, light fixtures, pipes, rebar, and scaffolds should not ever be used as anchorage points.

Don't be the product, buy the product!